AGL Airtesting AGL Airtesting advertisement 
Home | About | Catalogue | Training | Terms | Links | Contact Us | Members Area   
Catalogue...
Please select a category from below:


Download a CSV format price listOr click here to download our price list
(this is in CSV format, compatible with most spreadsheet programs)


Click here to subscribe to our free newsletter
.
PAGE: 1 2

IAQ-CALC Indoor Air Quality Meter
IAQ-CALC Indoor Air Quality Meter
The IAQ-CALC is an indoor air quality instrument for investigating and monitoring building air quality. These IAQ instruments simultaneously measure and data log multiple parameters. These are CO2, temperature, humidity, and calculates dew point, wet bulb temperature, absolute humidity, humidity ration and % outside air. Some also monitor for CO.

CO2
•Sensor Type: Dual-wavelength NDIR
(non-dispersive
infrared)
•Range: 0 to 500 ppm
•Resolution: 1 ppm

Temperature
•Sensor Type: Thermistor
•Range: 0 to 60c
•Resolution: 0.1c

Relative Humidity
•Sensor Type: Thin-film capacitive
•Range: 5% to 95% RH
•Resolution: 0.1% RH

Dew Point
•Range -15 to 49c
•Resolution: 0.1c

Wet Bulb Temperature
•Range: 5 to 60c
•Resolution: 0.1c

Absolute Humidity
•Range: 0.24 to 79.0g
moisture/m3 air

Humidity Ratio
•Range: 0.14 to 187g moisture/
kg dry air

% Outside Air
•Range: 0 to 100%
•Resolution: 0.1%

CO
•Sensor Type: Electro-chemical
•Range: 0 to 500 ppm
•Resolution: 0.1 ppm

Weight: 0.53kg

Dimensions: 100mm x 168mm x 38mm







SIDEPAK Sampling Pump
SIDEPAK Sampling Pump A3009
Personal Sampling Pump
The SIDEPAK Personal Sampling Pump is a rugged and lightweight pump. The SIDEPACK features a Smart Battery Management System for precise run time information in minutes remaining.
The SIDEPAK is an intrinsically safe personal sampling pump and is ideal for the sampling of aerosols, gases and vapors in hazardous environments.
DATA LOGGING MODELS AVAILABLE

Flow Rate: 3 L/min
Weight: 0.45kg
Applications
•Ambient/work area monitoring
•Personal exposure monitoring/IH
studies
•Environmental sampling
•Engineering studies
•Epidemiology health studies


Q-TRAK Plus Indoor Air Quality Meter
Q-TRAK Plus Indoor Air Quality Meter A1040
The Q-TRAK Plus simultaneously measures CO2, CO, temperature and humidity, all within a single probe.
These air quality instruments provide real-time measurements and can log data unattended over an extended period of time.

CO2
• Sensor Type: Non-dispersive
infrared (NDIR)
• Range: 0 to 5,000 ppm
• Resolution: 1 ppm
• Response Time: 20 seconds

Temperature
•Sensor Type: Thermistor
•Range: 0 to 50c
•Resolution: 0.1c
•Response Time: 30 seconds

Humidity
•Sensor Type: Thin-film capacitive
•Range: 5 to 95% RH
•Resolution: 0.1% RH
•Response Time: 20 seconds

CO
•Sensor Type: Electro-chemical
•Range: 0 to 500 ppm
•Resolution: 0.1 ppm
•Response Time: <60 sec to 90% of
final value

Weight: 0.59kg

Dimensions: 107mm x 183mm x 38mm









TSI Velocicalc Plus
TSI Velocicalc Plus A1041
Multi-Parameter Ventilation Meter
The VELOCICALC Plus simultaneously measures and data logs several ventilation parameters using a single probe with multiple sensors. The VELOCICALC measures temperature, humidity and pressure. It also features automatic calculation of flow rate and automatic conversion between actual and standard velocity readings.
The meter uses either a thermal sensor or a Pitot tube to measure velocity. It also makes dew point, wet bulb and heat flow calculations.

Velocity From Thermal Sensor
•Range: 0 to 50m/s
•Resolution: 0.01m/s

Duct Size
•Range: 1 to 635cm in
increments of 0.1cm


Static/Differential Pressure
•Range: -1245 to +3735 Pa
•Resolution: 1 Pa

Relative Humidity
•Range: 0 to 95% rh
•Resolution: 0.1% rh

Wet Bulb Temperature
•Range: 5 to 60c
•Resolution: 0.1c

Dewpoint
•Range: -15 to 49c
•Resolution: 0.1c






Applications
•HVAC system testing, adjusting
balance
•HVAC diagnostics and IAQ parameters
•Energy effciency studies
•Fume hood and bio-safety cabinet
certification

TSI DUSTRAK
TSI DUSTRAK A225
This Is a portable, battery operated laser photometer which gives you a real-time digital read out with the added benefits of a built in data logger. Suitable for clean office settings as well as harsh industrial workplaces, the DUSTRAK identifies potential problems with airborne contaminants such as dust, smokes, fumes and mists.
Simple operation allows walkthrough surveys, quick spot checks as well as long term advanced sampling programs.
  • Including continuous unattended operation.
  • Outdoor applications can also be undertaken, an environmental enclosure is available for extended surveys.
  • Concentration levels TSP, PM10, PM2.5, PM1
  • Mains and battery operation
PAGE: 1 2
 
Home | About | Catalogue | Training | Terms | Newsletter | Site map | Contact Us
All content © 2004 AGL Airtesting
Web Development by Egton Software Services