|
|
|
CALL 01782 435100
|
|
|
Airpointer
|
A2007C |
|
Continuous ambient multi gas analyser
|
Airpointer is a new concept in air quality monitoring technology. Designed for ’hot spot’ monitoring or locations where space or planning consent prevents the use of large conventional monitoring stations, the Airpointer offers similar performance in a small enclosure. Although the system is compact it does not compromise on accuracy as it is utilises reference method optical monitoring techniques. The system is controlled by an advanced PC module which carefully manages the air conditioned environment inside the enclosure and up to four gas.
Ideal for urban sites where space is at a premium or on industrial “fence line” applications the Airpointer is robust and able to operate in harsh weather conditions. The system requires little attention and is easily calibrated and maintained. The ingenious design provides monitoring of NOx, SO2, CO, O3, atmospheric pressure & temperature and optionally, wind speed & direction and a range of other sensors to suit your particular application requirements. The Airpointer is very quiet in operation making it possible to locate in residential areas or even indoors. Airpointer requires only 350W of power at 230V and can be run from a standard street light supply or from a vehicle power supply using an inverter, so mobile operation with GPS location is also possible. The system is fully upgradeable using a plug & play concept for future expansion.
Our rental unit is equipped for NOx and SO2
|
|
Please note: An installation is required with this kit
|
|
|
Mercury Vapour Indicator
|
A2005 |
|
No need to know where Mercury is before measuring:
|
MVI finds the contamination and measures it quickly and accurately
Highly accurate measurement -
(other monitors may only be accurate to plus or minus 20%)!
Very fast (almost instantaneous) reaction to Mercury - (other monitors may require up to 1 minute to get a reading)!
Not just a "Spot" checker - MVI gives continuous readings
No need to regenerate between readings.
At 25 micrograms/M3 the MVI's audible alarm warns when you have exceeded the HSE's, EH40 recommended limit
"One-hand" operation
Large digital display
Continuous Readings
Audible alarm warns of high Mercury level
High performance pump for fast indication and recovery
Intelligent battery charger, means it is always "Ready to Go"
|
|
|
|
|
Met One Weather Station
|
A3070 |
* Wind Speed
* Wind Direction
* Temperature
* Humiditry
* Rain gauge
* Sun Gauge
|
|
|
|
 JPG small.jpg)
|
Horiba APMA-360 CO Analyser
|
A2006 |
|
NDIR CO Analyser
|
The APMA-360 uses cross flow modulated non-dispersive infrared absorption to measure Carbon Monoxide. The cross flow modulation infrared-absorption technology eliminates the need for troublesome optical adjustments. For the user, this means very stable and sensitive (5 ppm F.S.) measurements.
The APMA-360 uses an AS-type interference-compensating detector, and a flowing reference gas. The reference gas is generated by flowing sample through an oxidation process, where an oxidising catalyst burns the CO to CO2. These features eliminate the interference effect of other elements, resulting in extremely accurate measurements.
The APMA-360 does not use components, such as reflecting mirrors that attract foreign matter. This means the optical bench stays clean assuring you of stable results over long periods of time.
The sensitive, accurate, minimal-maintenance APMA-360 provides precise atmospheric pollution monitoring data.
The APMA-360 is approved by U.S. EPA, TA-Luft and has approval for use within the UK AURN.
|
|
|
|
|
Servomex Paramagnetic oxygen analyser
|
A2010 |
|
Portable and rack-mount versions available
|
Oxygen analysers for determining the O2 content of a gas sample in the range of 0 to 25%.
Other applications include ambient, indoor and confined space surveys.
* Intrinsically safe.
* 0 - 1 volt output
* Mains or battery operation
|
|
|
|
|
|
|
| |
|
Or click here to download our price list