|
|
|
.
|
|
|
Stack gas sampling
|
A266 |
|
Low flow sampler
|
low flow heated gas sampler
for VOC's, sampling, HF and HCl
Flow rates ranging from 0.3 up to 2lpm.
The system utilises a heated probe
a mass flow control system, giving readings of flow rate in litres per minute and a standardised total volume
|
Polypropylene sample bottles
(Changeable)
Heated sample probe( monel liner)
(Changeable)
Monel hosebarb connector
Pid heater controller
Total corrected volume displayed
Flow rate displayed
Control type mass flow controlled
mains power 110v
Current up to 5 amps
weight approx 5 kg
|
|
|
Combustion Analyser
|
A1027 |
|
Greenline 4000
|
Hand Held 4 cell combustion analysers
NO,NO2,CO,O2
Data logging upto 250 pts
Pt100 temp sensor
Battery powered
Light weight 1.1kg
Download full spec click on "view more" and go to the pdf
|
|
|
|
|
Combustion Analyser
|
A1027 |
|
Greenline 8000
|
High performance Combustion analyser
Infra red /electrochemical cell
Mcerts type II pending
low Nox
low CO
Oxygen
Heated filter
Heated line
Gas conditoner
up to 9 cell measuring options
|
|
|
|
|
Automated GAS ANALYSIS
|
A266 |
|
Stack and Ambient
|
Volatile organics/Gas sampling train see US EPA methods.
Can be used as a simple(easy to use) mass flow controlled sampling unit to monitor for gases such as ammonia,hcl, fluorides.
A sampling train is coupled to the inlet of the unit.The unit has it is own moisture trap into which you place silica gel as an absorbent
You nominally would set aflow rate as required which may be for example 1lpm over 30mins. This is typical for most gas sampling.
The gas vapour is drawn into the impinger by the sampling unit. The impinger content is sent to the laboratory for analysis. This is a quick,simple test methods.
Flow rates can be set, sampling start and stop times can be set or total volume sampled can be set.
The unit can be programmed in 30 seconds
Sampling volumes are standardised and logged,as are flow rates and dates together with times.
The unit is designed to run from either 110v/220v or 12v
Weight 13kg
|
|
|
|
|
Combustion Analyser
|
A1027 |
|
Quintox
|
Combustion analyzer
This is an inexpensive simple and robust way of doing flue gas monitoring.The unit comes complete with case,cary strap, moisture trap,battery charger, probe, SO2 filter, probe and 15ft sample line 2 x paper rolls.
For hot gases you need to use a cooler.
Ambient operating range: 0 to 40 deg C
Max temp: 40 deg C
| SensorRange | Resolution | Accuracy |
O2 | 0-25% | 0.1% | +/- 0.2% |
CO | 0-10,000ppm | 1ppm | +/- 20ppm |
NO | 0-5000ppm | 1ppm | +/- 5ppm |
NO2 | 0-1000ppm | 1ppm | +/- 5ppm |
CO2 | calculated | | |
Battery power: 12v 6 Ahr (8 full hrs with pump on)
Flue gas probe: Stainles steel shaft with rubber handle
Flue gas hose: 5m/15ft neoprene hose and thermocouple.
Probe dimension: 300mm x 8mm/ 12” x 5/16”
Max probe temperature: 600 deg C
Temperature accuarcy: +/- 1deg C
Pre programmed fuels: natural gas,natural gas2, gascor, town gas, Light oil, heavy oil, propane, butane, anthracite, coke, coal.
Dimensions: 450(L)mmx 230(W)mmx 300mm(H)
Complete case: 9.5Kg
Drier A282K
A light weight peltier cooler
Max flow: 2.5lpm
Nominal Temperature
|
|
|
|
|
|
|
| |
|
Or click here to download our price list